Common failure and treatment way of circular vibrating screen

2017-09-18

The circular vibrating screen is mainly used in the mechanism sand production project, which is used to grade the stone materials after they are crushed and washed.

There are some common failure and treatment way of circular vibrating screen:
1. The sieving quality of the circular vibrating screen is not good: the problem may be caused by improper operation and may also be caused by the blockage of the circular vibrating screen. The increase of fine grain in the material of circular vibrating screen and the increase of water, make the upper layer of circular vibrating screen thick and materials fed evenly. In this case, we can wait for the circular vibrating screen to be processed, and then rotate the circular vibrating screen for a period of time to improve the sieve quality of the circular vibrating screen.
2, When circular vibrating screen in normal work, circular vibrating screen rotates slowly, bearing heats up. Appearing the situation shows that circle vibrating screen maintenance is not enough, which leads to circular vibrating screen bearings lack of grease. If the circular vibrating screen is added new grease on bearing, the reason may be the quality problem of the grease or add too full, and poor oil can make bearing of circular vibrating screen blockage, so the grease quality of the circular vibrating screen is quite important.
3, If the noise of circular vibrating screen the noise is too big during the work, the reason may be variety, for example circular vibrating screen is bearing damage, fracture and spring is loose, spring s damage and so on. At this time, the machine needs to replacement parts timely.

There are many factors to focus on in using so that we can protect our machine. Luoyang LZZG offers customer circular vibrating screen and considerate after-services. If you have any problems, please contact us, we will answer you as soon as possible.